TS Series

Active Vibration Isolation

The inherent stiffness of the TS system imparts excellent directional and positional stability while minimizing settling time. In addition, the TS system isolates all six degrees of freedom, ensuring a stable measuring environment.

  • Active Isolation from 0.7 Hz to 1,000 Hz
  • Passive Isolation beyond 1,000 Hz
  • Lack of low frequency resonance means much better performance than passive systems
  • 500 times stiffer than passive systems
  • Auto load adjustment
  • No adjustment required for installation, simply plug and play!

This active vibration isolation system provides isolation beginning at 0.7 Hz
   
Model
Dimensions
Load Capacity
(per module)
TS-150
400 x 450 x 75 mm
15.7 x 17.7 x 3"
150 kg
330 lbs
TS-140
500 x 600 x 85 mm
19.6 x 23.6 x 3.3"
140 kg
300 lbs
TS-300
600 x 800 x 120 mm
23.6 x 31.5 x 4.7"
300 kg
660 lbs
TS-300LT
600 x 800 x 120 mm
23.6 x 31.5 x 4.7"
120 kg
265 lbs
Technical Specifications
Isolation  
Isolation: dynamic from 0.7 Hz to 1000 Hz, passive beyond 1000 Hz in all six degrees of freedom
Transmissibility: Above 10 Hz transmissibility <0.01 (-40dB)
Static Compliance: Vertical approx 12 µm / N
Horizontal approx 30 - 40 µm/ N
Electrical
Safety Class: 1
Power Consumption typically 10 W, maximum 50 W (70 VA)
Input Voltage: 115-230 V AC 10%, 50-60 Hz
Monitor Signal: A multiplexed signal for display on oscilloscope shows vibration levels with and without isolation.
Mounting Surface  
Material: Aluminum, Also available with ferromagnetic steel with drilled & tapped holes
 
address:
23151 Alcalde Drive, Ste B-3
Laguna Hills, CA 92653
tel/fax:
949-363-2905 ,
949-340-9751
Copyright © 1996-2008 HERZAN LLC  All Rights Reserved.